H£ss£;2su, Removing the work, Creative embroidery – SINGER W2135 User Manual

Page 16

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

;;-;-2-h£sS£;2Su

14

REMOVING THE WORK

Be

sure

to

stop

the

machine

when

the

thread

take-up

lever and needle bar are located at the highest position.

Now raise the presser foot and draw the fabric back and

to the left, Fig. 21-A and B, and pass the threads over the

thread cutter.

Pull

down

slightly,

holding

thread

in

both

hands,

so

as

not to bend the needle.

Leave the ends of thread under the presser foot.

CREATIVE EMBROIDERY

Be sure zigzag presser foot and zigzag needle plate are

in place.

The

satin

stitch,

Fig.

22,

which is really just a very short

zigzag stitch, and the basis for

Fig. 22

most

embroidery,

is

obtained

by

setting

the

stitch

length

as

near 0 as possible without stopping the feeding action.

The width may be set anywhere from just past 0 to the

widest, 4.

Fig. 21-A

Fig. 21-B

Advertising