Embroidering with a hoop – SINGER W2135 User Manual

Page 18

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

16

E. Drop feed, lock stitch width at 4, take 3 or 4 stitches, leave needle in fabric left of stitches.

Pivot fabric on needle to make next daisy petal. Continue until flower design is complete.

Lock threads by setting stitch width at 0 and taking 3 or 4 stitches in center of design.

EMBROIDERING WITH A HOOP

It is easy to follow a stamped design or to work

free hand when embroidering or monogramming.

(See

Fig.

24).

Release

the

pressure

from

the

foot

by

pressing

down

the

snap

lock

on

the

automatic

darner. Turn the drop feed knob to "DARN" posi­

tion.

Stretch

the

fabric

in

an

embroidery

hoop,

and

place

under

the

needle

after

removing

the

presser

foot. Set the stitch width at the size you prefer and

lower

the

presser

bar

lifter.

Then

operate

the

machine

at

a

rather

high

speed

while

moving

the hoop slowly with both hands. Work carefully and be sure to keep fingers out of the path

of the needle.

Advertising