SINGER W106 User Manual

Page 39

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

02/14/2008

THE SET OF HEMMERS

Before attaching any of the hemmers, be sure bobbin thread is pulled up.
Then, with hemmer in place, hold top thread loosely

and

turn

handwheel

one

full

turn

'

toward

you,

making

a

loop

under

hemmer. Grasp bobbin thread with both hands and slip horizontally under hemmer

toward back. Bobbin thread will catch loop and carry upper thread to back of
hemmer.

Fold material to suit for two inches along edge, hold at each end of fold. Slip fold
into guide and up over spoon. Fold hem in material back of hemmer. Draw forward
to end of hem and fasten with point of needle. Pull on threads gently as you start
stitching.

You can make a hem 1/4", 3/8 , 5/8 or 7/8
hemmer you use, A few uses are shown below.

in width, depending upon which

Advertising