To control amount of thread on bobbin, If thread doesn’t wind evenly, When bobbin is full – SINGER 115 User Manual
Page 16
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
14
WINDING THE BOBBIN (Cont’d)
When bobbin is full
I Stop machine.
I When bobbin is full the bobbin winder
will lift away automatically.
I Remove bobbin and tighten stop motion
screw.
TO CONTROL AMOUNT OF
THREAD ON BOBBIN
i
Loosen screw which holds
stop latch to bobbin winder
frame (A).
1 Press bobbin winder frame on
handwheel for more thread
on bobbin
1 Lift bobbin winder frame for
less thread on bobbin.
1 Tighten stop latch screw.
If thread doesn’t wind evenly
Loosen screw which holds
bobbin
winder
tension
bracket to machine bed.
Move bracket to left if
bobbin winds high on
right; move to right if
bobbin winds high on left.
Tighten tension bracket
screw.