The zipper foot, Preparation – SINGER 115 User Manual
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
THE ZIPPER FOOT
This foot is designed to facilitate the placement of stitching close
to a raised edge. The hinged feature of this foot insures even feeding
over pins, heavy layers of fabric or cross seams. It is attached to the
machine in place of the regular presser foot, and may be adjusted to
either the right or left of the needle.
Slip Cover Welting
• Secure zipper foot to presser bar as you
would the regular presser foot.
Adjustment to right or left of needle is
made by loosening thumb screw at back of
With foot down, check position of foot by
lowering needle into side notch, making sure
it clears foot.
Lock into position by tightening thumb