SINGER 115 User Manual
Page 20
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
REGULATING LENGHT OF STITCH
18
Numerals on both* sides of indicator
represent number of stitches per inch.
To set stitch lenght
• Release thumb screw on stitch indicator
plate and move to bottom slot.
• Position lever for desired stitch lenght.
• Lift the thumb screw until the plate
stops against the position lever.
• Tighten thumb screw.
For reverse stitching, the lever should be raised until it stops
again the top plate. This will provide the same number of stitches
as selected for forward stitching.
Advertising