Replacing the bobbin case – SINGER 115 User Manual
Page 18
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
16
REPLACING THE BOBBIN CASE
NOTCH
POSITION FINGER
STUD
Hold bobbin case by latch and place it on
stud with position finger opposite notch at
top of shuttle race, having thread draw
from top of bobbin case.
Release latch and press bobbin case back
until latch enters groove in stud.
Allow about three inches of thread to hang
free from bobbin case and close slide plate.
Advertising