SINGER 115 - Manual (Page 36)

34
THE RÜFFLER
FORK
ARMV
Adjusting Points
1. Adjusting lever sets niffler for gathers or
ADJUSTING
pleats. Number 1 space setting is for gathers
and places fullness at every stitch. Numbers
6 and 12 are space settings for pleats, spacing
them 6 or 12 stitches apart. Star is for.
straight stitching and is used when grouping
gathers or pleats.
LEVER
ADJUSTING
FINGER
0 ) ^ADJUSTING
SCREW
SEPARATOR
BLADE
RUFFLING
BLADE
SEPARATOR
GUIDE
This attachment offers a simple and
effective way to make gathered and pleated
ruffles. Ruffles may be made separately or
made and applied at the same time.
2. Adjusting finger is used only for pleating
and affects width of pleat. It is disengaged
by bringing it out of contact with adjusting
screw.
3. Adjusting screw regulates fullness of
gathers or pleats. When turned in to its
limit with adjusting finger in place, attach­
ment is set for its deepest pleat. When
turned outward to its limit, with adjusting
finger out of action, ruffier gives only a hint
of fullness.