Straight stitching, Straight stitching -13 – SINGER W2137 User Manual
Page 14
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
% j-
STRAIGHT STITCHING
For straight sowing on fine fabric or vsry soft material^
it is advisable to use the straight stitch presser foot and
the
straight
stitch
needle
plate
which
are
included
in
your accesory box. Both have narrow needle slots.
Changing the Foot and Plate.
To change presser
foot 16, Fig. 1) loosen thumb screw 17 and remove
zigzag foot. Replace with hinged straight foot and
^ ^ _
tighten screw securely.
To changl i^edle plate (14, Fig. 1) remove screw and lift off with cover plate 15
attached. Hold needle plate with left hand and cover plate with the right. Fig. 1 2 )
Press
upper
corner
of
cover
plate
(right
side
up)
down
slightly
and
slip
pin
from
groove in needle plate. Avoid using too much pressure. When the pin is released the
two plates will separate.
Attach cover plate to straight stitch plate by reversing the above procedure.
Slip
pin
on
lower
side
of
cover
plate
into
groove
on
needle
plate.
Insert
tongue
into
square
opening
and
slide
upper
pin
into
position.
Put
plates
on
machine
and
fasten securely with needle plate screw.
..- 12
Fig. 12
I
I
I
I
I
«