SINGER W2137 User Manual
Page 34
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Fig. 42
HOW TO REPLACE LIGHT BULB
Grasp light bulb button (see 31, Fig. 2. and pull light bracket down
ward.
Unscrew
bulb
and
replace
with
bulb
oi
same
size,
which
is
available from your sewing machine dealer.
HOW TO CHANGE THE BELT
IE it should ever become necessary to replace the belt on your ma
chine, the hand wheel must iirst be loosened and moved out.
To do this, follow thosG instxuctions .
1
Remove clutch nut A in center of wheel by taking out the small
’ screw B near the edge, Fig. 40. Turn nut counterclockwise until
it can be lifted off.
2
Before moving the hand wheel, note the position of the washer,
C, Fig. 41, which fits under the clutch nut. It may fall out when
you are changing the belt.
3.
Pull hand wheel away from the machine carefully, Fig. 42. Pull
it just far enough to make the grooved section which holds the
belt accessible.
4,
Slide old belt over hand wheel and over pulley on the end of
motor.
...
32
-