Preparing to sew, Preparing to sew -17 – SINGER W2137 User Manual

Page 18

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Fig. 19

B down again to halfway spot. Lower the feed slightly by turn­

ing the drop feed knob to SILK.

Darning and Monogramming.

In order to move the fabric

freely in any direction for darning, mending and certain kinds of

free-hand

embroidery,

release

the

pressure

cap

B

completely

by pressing down on the snap lock, A, Fig. 18. Turn the drop

feed

knob

to

DARN

position,

which

drops

the

feed

well

below

the needle plate. To return feed to normal, turn knob to REG.

PREPARING TO SEW

Have take-up lever at highest point before starting to sew. Do

not try to help the feeding by pulling the material as this may

deflect the needle and cause it to break.

NEVER run machine without material between presser foot and

and feed. Place material and threads in position under the pres­

ser foot and lower the presser foot. Turn the hand wheel toward

you until the needle is at its highest point. You are now ready

16

Advertising