Setting the stitch length, Stitch length chart (approximate) – SINGER W2137 User Manual
Page 15
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Be sure to set the stitch width at O,
or the
needle
will
break
in
striking
the
toot
or
plate.
Push the zigzag lever 7, Fig. 13} all the way to the
left so that pointer is over 0 in stitch width window.
Set both locks, 6, as far to the left as possible.
To move locks, pull knobs slightly and slide, then
release.
SETTING THE STITCH LENGTH
The length of the stitch is regulated by the dial A shown
in Fig 14. Near 0 is the shortest stitch and 6 is the longest.
Turn the dial to the left to lengthen and to the right to shorten
the stitch.
STITCH LENGTH CHART (Approximate)
Figures on dial
0
1
2
3
4
5
6
Number of
stitches per inch
No Feeding
36
20
12
9
7
5
13
Fig. 14