Straight stitching, Setting the stitch length, Stitch length chart approximate – SINGER W159 User Manual
Page 12
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
STRAIGHT STITCHING
Be sure to set the stitch width at “0” position. Adjust lever (2) to
left side 0 position.
(Fig. 12)
SETTING THE STITCH LENGTH
The length of the stitch is regulated by lever 6 shown m Fig. 12.
Near 0 is the shortest and 4 is the longest. Set the lever to the down
to lengthen and to the up (near 0) to shorten the stitch.
Fig. 12
STITCH LENGTH CHART Approximate
11
Advertising