SINGER W159 - Manual (Page 22)

THE ADJUSTABLE CORDING AND
ZIPPER FOOT
This attachment is used to make and insert
covered cording, and to sew in zippers. Loosen
thumb screw to slide foot to either right or left of
needle.
CORDING. Fold bias strip of fabric over cord.
Loosen thumb screw and set foot so needle is
centered in needle hole. Machine baste cord in place
(Fig. 49).
To sew covered cord to material, reset adjust­
able foot so needle stitches closer to cord, and on
edge of base fabric.
Fig. 33
Fig. 32 -B
Fig. 32-A
SEWING IN A ZIPPER
Loosen thumb screw and slide foot so needle enters center of
needle hole. Guide metal of zipper along edge of foot (Fig. 33).
Stitching should be close to z,ipper to allow easy opening and
closing. Adjust to sew from either right or left side, whichever is
more convenient.
21