The built-in light – SINGER W159 User Manual
Page 26
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
8 Replace clutch nut and screw C. After doing this, turn clutch toward you to disengage sewing mechanism. If the needle
still moves up and down as you turn the balance wheel, again remove the clutch nut, give washer D a half turn and
replace the unit.
THE BUILT-IN LIGHT
FRONT SEW LIGHT
1. The lamp housing is enclosed in the hinged face place. Screw out bulb as shown in Fig.
42, and then insert the new bulb.
2.
For replacement, use lO-C-7 or 7-C 7. or “night light” bulb available everywhere. Use
switch on face plate to turn this light on and off.
Fig. 42
2 5
Advertising