Choosing and changing needles, Changing the needle plate (a), (c), Changing screw-on presser feet (h) – SINGER SM14 Style Mate User Manual
Page 16: Changing the needle plate, Changing screw-on presser feet, Liliïll, Êdilsdd’iêdêuêi, Feet, Changing screw-on presser
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
choosing and changing
needles
• Raise needle to its highest position.
• Loosen needle clamp screw and remove
needle.
• With flat side of needle to the back, insert
new needle up into clamp as far as it will go.
• Tighten needle clamp screw securely.
changing the needle
plate (A), (C)
• Raise needle and presser foot.
• Open slide plate,
• Lift up needle plate from right corner and
slide out from under foot.
• To replace needle plate, slide it under pin
(1) and push it firmly to the left.
• Press down until it snaps into place.
Changing screw-on
presser
feet
(H)
® Raise needle and presser foot,
« Loosen presser foot screw (1) and remove
presser foot with shank (2), guiding it toward
you and to the right.
® To replace presser foot with shank, hook
shank around the presser bar and tighten
presser foot screw with the use of a coin.
mimimsmïïniÊmÊmMmms
.■'.vVv.'i-;
vs's^;:.&sw»sïmar -n^
■m
'.CD
'ÊDilSDD’IÊDÊUÊi
liliïll
igaBiiïliiiiap
14