Zig-zag, Stitching, Needle position selector – SINGER SM14 Style Mate User Manual
Page 42: Stitch width selector, Adjusting stitch length, Stitch width selector adjusting stitch length, Zig-zag stitching
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Zig-zag
stitching
Before moving selector, make sure needle is
fully raised.
Needle position
selector
Most of your zig-zag stitching will be done with
the needle in the centre ( ^ ) position.
Left{ ^)andright( ^ ) settings are used for
special stitch piqcement.
Stitch width
selector
To produce any of the zig-zag stitches, the stitch
width selector is moved from its straight
position ( I } to any of its other positions.
The further you move the selector lever toward
the right, the wider your stitch will be.
Adjusting stitch
length
Any stitch length setting from 1 to 5 will give
you an open zig-zag stitch.
The higher the number, the more open, or
further apart your stitches will be.
The area between 0 and ^ on the dial is used
for satin stitching, a series of closely spaced
plain zig-zag stitches that form a smooth
satin-like surface.
40