Cloth guide, Adjusting thread tension – SINGER W1122 User Manual
Page 24
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Cloth Guide
Use cloth guide when sewing a
long seam of regular distance
from edge of material.
Set guide in hole on arm, at right
of needle plate, and adjust
distance.
Run machine with edge of fabric
touching guide.
Position cloth guide at an angle
to sew a curved seam.
Sew reverse stitches for rein
forcement at end of seam.
Draw fabric to left when sewing
is finished.
Cut threads with thread cutter
behind presser bar.
Adjusting Thread Tension
Test stitch performance on a
scrap of material you are going
to use.
With correct tension f@), upper
3
nd lower threads tension is
equal and strong enough to lock
both threads in center.
If upper tension is too tight
(loose), upper (lower) thread lies
straight along upper (lower)
surface of fabric (©■©)• Correct
by turning tension dial.