SINGER W1122 User Manual
Page 9
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Set needle
position by
towards you
Changing Needle
in the highest
turning handwheel
Loosen needle clamp screw and
take out needle.
With flat face away from you,
insert a new needle into groove
of needle bar.
Push needle until it reaches
stopper (a) and tighten needle
clamp screw firmly.
Proper needle
straight shaft
sharp point
Always use a straight needle with
a sharp point.
Using defective or worn needles
not only causes stitch skipping,
breakage of needles or snapping
of thread: it also can damage
hook and needle plate.
-6-
Advertising