SINGER W1122 User Manual
Page 30
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
7. SEWING ON BUTTONS
Set machine as shown.
Position a button and material
under foot. When needle comes
to left side of stitch, lower foot.
Raise needle and adjust zigzag
width so that needle comes to
right hole of button.
Run machine at medium speed
and sew 5-6 zigzag stitches.
Stop machine when needle is in
upper position.
@ Set zigzag width control to 0
and sew 3-4 stitches to prevent
unstitching.
OR
(jb) Draw out work and cut off
threads.
Draw thread ends through to
wrong side and tie a knot.
-27-
Advertising