Zigzag width control, Needle position control, Thread tension for zigzag stitch – SINGER W1122 User Manual
Page 26
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
To prevent seam ends unravell
ing, set machine for straight
stitch and sew in reverse at
beginning and ending of seam.
5. ZIGZAG SEWING
Set machine as shown.
Zigzag Width Control
Set control at required number.
Larger the number, wider the
stitch.
Set it at 0 for straight sewing.
Make sure needle is in upper
position when you set control.
Needle Position Control
Needle position can be changed
by
turning
needle
position
control.
When selecting position, make
sure needle is in upper position
to avoid tearing material or
bending needle.
Posirion
Straight 1
stitch
Zigiag
StFtCh
{width 2.5)
1
”0
1
1
1
1
1
(
Lett position:
button sewing,
etc.
.0
--- '--- J
1
1
\
1
1
Mid die position:
straight stitch,
buttonholes, etc.
•O
'--
1
1
Right position:
1 ouertock, etc.
Thread Tension for Zigzag
Stitch
Better-looking zigzag stitching
requires less upper tension than
straight stitching.
Loosen upper tension slightly.
back side
right side
2 3 -