SINGER 717 Scholastic User Manual
Page 13
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
THREADING THE BOBBIN CASE
1. Hold bobbin so that the thread unwinds
in direction shown, and put bobbin in
bobbin case.
2. Pull thread into notch in bobbin case,
draw it under the tension spring and
into the slot
3. Draw approximately three inches of
thread diagonally across the bobbin.
4. Close slide plate, allowing the thread
to enter the slot in the slide plate.
11
Advertising
This manual is related to the following products: