SINGER 717 Scholastic User Manual
Page 22
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
CORVED SEAMS
1 - Use a short stitch for eiastichy and strength*
For example, if you use 12 stitches to the
inch for straight seams* seiect 15 to 20 per
inch to stitch curved seams in the same
fabric.
2.
if you use the seam guide to guide stitch
ing, attach it at an angle so that the edge
that is closer to the needle acts as a guide.
■
'
.■ V" "I
feh
;
Reverse-Stitch Lever
REMFonam Em
of
sear
^
1. stitch to the edge of the fabric.
2.
Press reverse-stitch lever all the way down
and hold in place. Backstitch approximately
Va inch to reinforce end of seam. Release
lever.
3.
Raise needle to its highest position, raise
the presser foot, and remove the fabric by
drawing it to the back and left.
4.
Cut threads on thread cutter at rear of
presser bar.
20