Zig-zag foot and throat plate, Straight stitch foot and throat plate, Zipper foot – SINGER 717 Scholastic User Manual
Page 7: Changing presser foot
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
4. ZIG-ZAG FOOT AND THROAT PLATE
The zig-zag foot and the zig-zag throat plate
are in place on your machine. Ideal for alt util
ity sewing, these fittings can be used for either
straight or zig-zag stitching. Always use them
together when alternating between straight
and zig-zag stitching.
5. STRAIGHT STITCH FOOT AND
THROAT PLATE
The straight stitch foot and the straight stitch
throat plate are used when your fabric or sew
ing procedure requires close control Espe
cially useful for:
• Precision stitching of curved and scalloped
edges, top stitching, edge stitching, etc.
♦ Stitching on delicate or spongy fabrics, syn
thetics, and knits.
6. ZIPPER FOOT
The zipper foot is used to place stitching close
to a raised edge. Thus, it is as useful for corded
seams and tubular cording as it is for zipper
insertion {page 32}, It can be adjusted to either
the right or left side of the needle and may be
used with the straight stitch or zig-zag throat
plate.
straight Stitch Foot and Throat Plate
Zipper Foot
Changing Presser Foot
1. Raise needle to its highest position and
raise the presser foot.
2. Loosen presser foot screw and remove the
foot,
3. Hook new foot around the presser bar and
tighten presser foot screw.
Changing Presser Foot