SINGER W816 - Manual (Page 13)

'PIJ\CJMG BOBBIN
Fig. 12
Raise needle bar to highest
„ , , powiuof), and (ifi hinaed
cover plate. (See 16 Fig. l ) Hold th»
latch ( D i o ) ^ ^ bobbin case
ch (D Fig. 12), between the thumb and forefinger
of the left hand, with at least three inches of thread
running from the top of the bobbin case to the right
Insert and center the bobbin case on the stud of the
s uttle body, (C). Be sure the bobbin case finger (E)
opposite the shuttle race notch; (A). Press the
un«l rtT®
11 latch catches on the center post of the shuttle,
en release the bobbin case latch, (D). Press bob­
bin case again after latch has been released to make
suf-s the bobbin case is locked securely.
Close the cover plate.
5 *5,^ .