Cleaning and oiling the shuttle – SINGER W816 User Manual
Page 36
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
35
CLEANING AND OILING THE SHUTTLE
(See Fig. 59 and 60)
The stitch forming mechanism occasionally becomes clogged with loose threads and
Imt. This will interfere with the efficient operation of the machine. Cleaning and
removal of the lint will safeguard the performance. To remove the shuttle assembly
proceed as follows:
1. Turn the balance wheel until the needle reaches Its highest position. Tilt head
back on its hinges.
2. Remove bobbin case ( A ) , Fig.
59
3. Turn the two shuttle race cover clamps (B) outward and remove the shuttle
race cover (C) and shuttle body ( D ) .
A C D B
Fig. 59
Fig. 60
Advertising