Cuing, Change as follows, Change – SINGER W816 User Manual
Page 19
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
“CUING
For straight aarving an fine fabric
or verv aaft 'Ti-naria!, it Is advis*
abie to use the straight stitch press
a-
ard
tho
straight
stitch
nee
dle plate %vhich arelncJatJsdin your
^uccassoiy box. Boih have narrow
nsedie slots. '
CHANGE
AS FOLLOWS
C1 ) Presser Foot
(A)
Loosen thumb screw (18, Fig. 1 ) and remove zigzag presser foot.
U3) Replace with straight stitch presser foot (Fig. 23).
(A) Slitia covBr plate
(16,
Fig. 1 ) to the front as far as possibis.
(B) Remove screws holding needle plate (15, Fig. 1 ) to bed plate.
(C) Remove zigzag needle plate.
(D) Replace with straight stitch needle plate (Fig. 22-B).
Fig. 23