Adjusting pressure and feeding of fabric, Feed, Sure – SINGER W816 User Manual
Page 16
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
15
Fig. 15
Fig. 16
Fig. 14
Fig. 17
Fig. 18
ADJUSTING PRESSURE AND FEEDING OF FABRIC
General Sewing. Usually for normal sewing the pressure bar cap or
darner release, (B, Fig. 18) is at its lowest position and the drop
feed
knob is turned to. "High” position, Fig. 19.
Sewing Thin or Light Weight Fabrics. When lighter pressure is re
quired to sew satisfactorily on thin silk or flimsy material, the pres
sure
cap should be about halfway down. Release ail the way by
pressing the snap lock, (A, Fig. 20), and then press cap (B) down
again to halfway spot. Lower the feed slightly by turning the black
i&i on t’:S Itnols to "Low” position. " '
'
^ ^ ^
^
Fig. 19