Section 3 straight stitching, Adjusting stitch length, I j l – SINGER 7050 User Manual
Page 22
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SECTION 3
STRAIGHT STITCHING
The Straight Stitch Needle Plate (C) and Presser Foot (D) help prevent skipped stitches
and control fabric when straight stitching around a curve or close to the fabric edge.
CAUTION: Straight Stitch Needle Plate and
Presser Foot should be used for straight
stitch sewing only.
Always change back to the appropriate
needle plate and presser foot when not
straight stitching.
4
M i l
i l l !
' I J L
0
■ " 1111111111 ll 1 I
d
O
ifflirillll ......... — ' 11 ,.
RECOMMENDED SETTINGS
Stitch Selection:
Straight Stitch
Stitch Width:
D ii
Stitch Length:
1 1/2 to 4
Foot:
Straight Stitch (D)
Needle Plate:
Straight Stitch (C)
ADJUSTING STITCH LENGTH
The stitch length indicator is numbered 0 -
4. The lower numbers are shorter stitches.
Shorter stitches are best for light-weight
fabrics; longer ones for heavy fabrics. To
adjust the length of your stitches, slide the
stitch length lever to the left or right.
20