SINGER W712 User Manual
Page 14
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
STRAIGHT STITCHING
^ For straight sewing -
“ptsl"
rTtnTthHtraTgM stitch needle plate which are in-
bo. Both ha.e narrow needle
Changing the Presser Foot and Needle Plate :
(1 ) Presser Foot
,
(A)
Loosen thumb screw
(18,
Fig. )
remove zigzag presser foot.
(B)
Replace with straight stitch presser foot
(Fig. 22A).
”(«'* Su“(o,er plate (16. Fi,. 1) to the left a,
far as possible.
(B)
Remove screws holding needle plate i ,
Fig. 1) to bed plate.
(C)
Remove zigzag needle plate.
(D)
Replace with straight stitch needle plate
(Fig. 22B).
1
Be sure to set the sHtch wtdth and buttonhole
i.
control knob at 0 or the needle will break in striking
S the foot or plate.
ogi
nress
i
Grasp outer rim of zigzag dial (A, Fig. 1
P
i
down on lock B. Turn dial as far to the left as possible.
Pointer will then be on the zero mark.
13
Fig. 22-A
ra-WESI
Fig. 23