Attachments, Attachment foot – SINGER W712 User Manual
Page 33
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
1
32
C-''^
Fig. 58
EDGESTITCHER
The edgestitcher is used in mak
ing
dainty
lace
insertions,
edgings
and piping.
The
slots
in
the
edgestitcher
serve
as
guides
in
sewing
together
various
pieces
of
material.
If
you
want to sew lace, lace and embroi
dery, or lace and tucked strips togeth
er, place the piece of material that
will be on top in slot 1 (Fig. 59)
and the lower fabric in slot 4. For
instance, if you are sewing lace edg
ing
to
a
finished
edge
of
fabric,
place the fabric in slot 1 and the
lace in slot 4 (Fig. 60).
't' rfi-:-
ATTACHMENTS
Be sure the needle positioning lever is in the
extreme left hand position.
ATTACHMENT FOOT
In order to attach binder, edgestitcher and the
hemmers, it is necessary to remove the presser foot
and replace it with the attachment foot. (Fig. 58)
Mount binder, edgestitcher or hemmers by
sliding the attachment to the left as possible and
tightening the screw.
The mounting slot enables you to sew as close
to or as far away from the edge as desired. Just move
the attachment to the correct position before tighten
ing the mounting screw.
; ■
-(Ttílí
Wt -