SINGER W712 User Manual
Page 18
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
17
( 5) Set buttonhole control at number 2 position for bur tacldng.
Sew four or live stitches, step 2.
(P , Set buttonhole control at number 3 lor rlpht hand side of buttonhole. This will
set the machine to sew m reverse.
Sew right hand side of buttonhole, step 3.
( 8 ) Set buttonhole control at number 4 position for oar tack.
Sew four or five stitches, step 4.
(9 ) Set buttonhole control at 0 position and take two or three stitches to fasten ar
tack to prevent ravelling.
(10) Cut the buttonhole opening with seam ripper, being careiul not to cut^ the
stitching.
If you plan to make buttonhcles on sheer or soft material, place tarlalon or paper
under fabric which can be torn away after stitching.
When making additional buttonholes, be sure to turn the buttonhole oentro. knob
to 0 and back to the number 1
position to put the machine in forward stitching.
:■ [ .;,.v4s>
: ■■■ ■■ t
--r "•'V
■ ":\r i y
:. V: b-
■ ■■ iM .V
iikip .i -w.
o...
phn
sV
M
j
:
m