SINGER W712 - Manual (Page 7)

Fig. 3
WINDING THE BOBBIN
ig.
Disengage hand wheel (5. Fig. 3), from the stitching mechanism by turning clutch (6. Fig- 3)
"NSsOD OW tl^Ding cp^ OHuOili^aTSS^SOtyer thread
Place a spool of thread on one of the spool pin . machine. Run end of thread
guide on arm and down through tension disc (9, Fig. bobbin edge (left flange
" and from inside out) and place bobbin
on spindle of bobbin winder !7, Fig.4,J iitting
the notch bobbin over small pm on spm-
Push bobbin winder against hand
v^^^eel. Hold thread end loosely and start
machine slowly. ^
Bobbin will stop winding wnen it is
filled Turn clutch away from you until
sewing mechanism is again engaged so
that needle moves when you turn the han
off loose thread end used to
start the winding and ' *
stated on Page 6 .
tiau. —
thread bobbin as