SINGER W1465 - Manual (Page 11)

10
STRAIGHT STITCHING
For straight sewing on fine fabric or very soft material
you xnay want to use the straight stitch presser foot and
t h e straight stitch needle plate which are included in
your accessory box. Both have narrow needle slots.
Changing the Presser Foot and Needle Plate :
Cl) Presser Foot
CA) Loosen thumb screw 20, Fig. 1 and remove
zigzag presser foot.
CB) Replace with straight stitch presser foot, Fig.
( 2 ) Needle Plate
CAl Slide cover plate 18, Fig. 1, to the left as
far as possible.
(B) Remove screws holding needle plate 17, Fig.
1, to bed plate. ' '
(C) Remove zigzag needle plate
■ (D) Replace with straight switch needle plate 12B.
the M selection knob 4, Fig. 12C at
the M position, zigzag stitch width control 5 at 0, and the
need e positioning lever 9 in the left hand position or the
needle will break in striking the foot or needle plate
Fig. 12-A
Fig. 12-B
Fig
V.
C
i
t
r
c