SINGER W1465 User Manual
Page 49
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
INSTALLING SEWING
HEAD IN CABINET
1.
Back off both head hinge set screws
until head hinge hole is clear.
2.
Tilt head hinge tongues up and back
as far as they will go.
3.
Carefully slip head onto head hinges
--making sure tongues are inserted as
far as they can go into head hinge holes.
4. Allow the head to rest in its tilted-back
position.
5.
Tighten both set screws securely with
screw driver.
6.
Plug electrical leads into sockets lo
cated
inside
cabinet.
Cord
identified
with "motor’’ tag must be plugged into
socket marked "motor". Untagged cord
goes to "light" socket.
Advertising