SINGER W1465 - Manual (Page 29)

28
If Machine
Binds
Thread or lint in
race way
Correction
1—With take-up lever in highest position, tilt head
back on hinges and remove bobbin case.
2 Turn clamps outward and remove race cover.
3— Remove hook.
4- Clean thread and lint from all parts, including
race.
^ Run a drop of oil along rim of hook.
6- Replace hook, then race cover. Snap clamps
into place.
7— Grasp threaded bobbin case by latch and re­
place, fitting tongue into notch of race cover.