SINGER W1465 User Manual
Page 16
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
CREATIVE EMBROIDERY
15
With,
the
use
of
the
needle
position
lever
in
combination
with
the
ziqzao
stitch
width
control, decorative stitch design possibilities are unlimited.
The basis for most embroidery is the satin stitch (Fig. 23) which is ohtainod K
the atitoh .e.,,h
heob (13
Fig, 24) e.
o.ose
to 0
as Posible withcjt „ppr„:"rele<liA, 1=“»
The needle position lever may be set in any position
ieediPg action.
The stitch width control (5 Fig. 24) may be set any
where from 0 to 4.
Fig. 23
.
ADJUSTING THE STITCH WIDTH
To stitch continuously at one width of zigzag stitch
ing,
set
pattern
selection
knob
4
at
"M"
and
zagzag
stHch width control knob 5 at 4 by turning zigzag stitch
width stop 6 Fig. 24.
should
you
wish
to
move
freely
between
only
two
widths such as 2 and 4 in doing free hand embroidery,
turn stitch width stop knob 6 to set zigzag stitch width
knob
to
desired
position.
The
number
2 width will be
produced until the zigzag width control knob 5 is moved
to the 4 width.
Fig. 24