SINGER W1465 User Manual
Page 41
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
40
OVERCASTING WORN EDGES
Zigzag stitch along the worn edges, catching the fabric as the
needle swings to the left, and allowing the needle to just pass
over the edge of the fabric on the right. Fig. 80.
PATCHING
Machine baste patch into
place
under
hole
or
worn
area
which
has
been
cut
away.
Then
zigzag
stitch
the
patch
into
place
by
overcasting
around
edge
of hole. Fig. 68.
Fig. 69
STRAIGHT OR THREE CORNERED TEAR
Zigzag stitch along a straight tear catching fabric on left and
right side of tear by swing of needle. Be sure your tensions
are not too tight or puckering will be encountered.
In
mending
a
three
cornered
tear,
zigzag
stitch
from
each
end to center. Fig, 70.