SINGER W1665 - Manual (Page 11)

7. Up and through take-up from right to left.
8. Down into thread guide G.
9. Into needle bar thread guide H and through
needle eye from front to back, pulling three
to four inches of thread through needle.
tSee Fig. 12)
Hold the end of the upper thread loosely and
turn hand wheel toward you until the needle
goes all the way down and comes back up. A
loop (Fig. 11) will be formed over the upper
thread which then can be pulled out straight.
Place both thread ends under the slot of the
presser foot and draw toward the back of the
machine, leaving both threads three to four
inches long.
Fig. 11