SINGER W1665 User Manual
Page 49
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
t
t
s
>
>
*
SHAPING DARTS
IN INTERFACINGS
Fig. 107
Center
Cut interfacing down center
between rlurt
Overlap cut edges, matching dart
lines.
Zicjmg lititoll
along marking line from point to
wide end of d«ri
Trim both raw edges close to stitching.
Fig.
Fig. 109
SEWING ON SHEER MATERIALS
Most fabrics need to be guided only in front of the presser foot as shown at left Many
filmy
sheers, crepes, knits, tricots, etc., require support while being
use
the straight stitch needle plate and presser foot and apply gentle tension by holding seam
in
front and back of the presser foot as shown at right.
Advertising