SINGER W1665 User Manual
Page 38
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
36
Be sure to draw the lace and material under the needle and back of the edgestitcher so that
the feed will carry it backward as you stitch. Hold the fabric in the left hand the lace in
the right, being sure the fabric overlaps the lace slightly.
Rick Rack can be sewn to the edge of the material in the same manner.
To trim with wide piping, place the fabric in solt 4, and the fold of the piping to the left
in slot 3, for a narrow piping place fabric in slot 2 and the folded edge of the piping to the
right in slot 3.
Slot 5 may be used as a guide in stitching a French seam.
See
Fig.
71,
72,
73
and
74
for
suggestions
on
how
to
use
the
edgestitcher.
There
hundreds of other uses.
are
Fig. 71
Fig. 73
Fig. 74