SINGER W1665 User Manual
Page 39
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
3
'
3
3
3
B I N D E R
This attachment folds bias binding, applies it to the edge of
on scroll of the binder are for corresponding widths of commercial folded bias bmdi g^
The open mouth of binder scroll is used for unfolded bias strips cut 15/16 me wi .
FOLDED BINDING
(Fig. 77)
’
^
'
Cut a point on folded binding, insert in appropriate slot.
:
_
Draw through slot and under binder with strong piii. Test
stitching to be sure it is on the edge. Adjust by sliding
binder to right or left.
TWO-TONE BINDING (Fig. 78)
Two bindings can be sewn on fabric edge also in one
operation. When two are used, always skip one size be
tween widths, inserting each in correct size slot.
HAND-CUT BIAS BINDING (Fig. 77)
Cut 15/16 inch bias binding fold in half for a couple
of
inches.
Cut
binding
diagonally
toward
end,
almost
to
fold.
Slip
fold
into
center
of
binder.
Draw
back
imtil
cut
opens
and
binding encircles open
end
of
scroll. Test
stitching to be sure it is on the edge adjust if necessary.
See Fig. 7b
and 76 for
suggestions
on how to use
the binder.
There
are
hundreds
of
other uses.
*
\
Fig. 76
Fig. 78