Raising the bobbin thread – SINGER 1280 User Manual
Page 27
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Raising the Bobbin Thread
Hold needie thread iightiy with left hand and turn hand
wheel slowly
toward you
until the needle enters plate
Continue
'n^ng hand wheel and holding needle
needle rises.
Tighten your
hold on the
needle thread and bnng
up
bobbin thread in a loop.
thread
until
Open the loop with your fingers. Draw approximately
10 cm (4 inches) of both threads
under
the presser foot
and place them diagonally to left. Close slide plate.
26
Advertising