Changing the needle, To select a suitable needle – SINGER W1550 User Manual
Page 13
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
I
-^1
{__ _
V
I
.......
(4)
(3)
i
CHANGING THE NEEDLE
1. Turn the hand wheel towards you
until the needle is at is highest posi
tion.
2. Loosen the needle clamp screw by
turning its top edge towards you.
Remove the needle from the
damn.............
3. Place the new needle into the needle
clamp with its flat side facing away
from you. Push the needle up into
needle clamp as far as possible.
4.
Tighten the needle clamp screw
firmly.
TO SELECT A SUITABLE NEEDLE
Stem
A number indicating the size of
needle is marked on the stem. The
higher the number, the thicker the
needle.
Do not use any needle which is bent
or blunted.
T—)
a'l-lt
I —f: ■ ri^V 'iL.lL--