Removing and attaching the presser foot, To remove, To attach – SINGER W1550 User Manual
Page 14
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
REMOVING AND ATTACHING THE PRESSER FOOT
To Remove;
1. Turn the hand : wheel towards you until
the needle is at its highest position. Raise
the presser foot by lifting the presser foot
lifter.
Presser -^ / |
1 ^ ' foot
1
(D '....
1
^ 2. By lifting the^Jeveron^he back of the foot
holder, the presser foot will drop off.
Note: *Do not force the presser foot to
remove it.
To Attach:
1. Place the presser foot so that the pin on
the foot lies just under the groove of the
foot holder. Lower the foot holder.
2. When the presser foot lifter is raised
you'll find the presser foot is locked in
place.
(D ^
10
Advertising