Picking up bobbin thread – SINGER W1550 User Manual
Page 19
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
PICKING UP BOBBIN THREAD
1. Raise presser foot iever. Hold needle
thread loosely in left hand and rotate
hand wheel toward you one complete
turn.
2.
Bring bobbin thread up by pulling
upper thread.
3. Pull both threads under and to the
back of the presser foot, leaving 3
to 4 inches of thread clear.
If you cannot pick up bottom thread
by following steps given above, then
check:
1. Is needle threaded from front to
back?
2. Is thread tangled around needle?
3. is there 3 to 4 inches of thread com
ing from the bobbin case?
4 Is thread from bobbin case tangled?
Advertising