The set of hemmers, Hemmer set – SINGER W1366 User Manual
Page 38
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
THE SET OF HEMMERS
37
Before
attaching
any
of
the
hemmers,
be
sure
bobbin thread is pulled up. Then, with hemmer in
place, hold top thread loosely and turn handwheel one
full turn toward you, making a loop under hemmer.
Grasp bobbin thread with both hands and slip
.
horizontally
under
hemmer
toward
back.
Bobbin
thread will catch loop and carry upper thread to back
of hemmer.
Fold material to suit for two inches along edge,
hold at each end of fold.
Slip fold into guide and
up over spoon
IFig.
7,1).
Fold he,m in m,aterial back of hemmer. Draw forward to end of hem
and fasten with point of needle. Pull on threads gently as you start stitching.
Fig. 71
H E M M E R S E T
You can miake a hem 1 '4", 3, ’8", 5,'8" or 7, 8" in width, depending upon
which hemmer you use. For a few of the many us.es see Figs. 72, 73, 74, 75,
76, and 77.