SINGER 14U52 User Manual
Page 14
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
o
(3a) Thread the right needle for standard 3.5mm stitch width
• To thread the right needle
Thread right needle thread in the order 0 to (j5> as shown. (Green thread path) For easy thread
ing of needle (i^ , set movable knife in non-operating position.
While holding thread with
finger wrap thread around
tension disk clockwise till
caught in hook and pull
thread down to mark cert
ain it is properly locat
ed in between the tension
discs.
• Lower needle bar when
threading (0 and
(j).
• Use tweezers to thread
needle eye (j|).
• Draw about 5cm (2
inches) of thread from
needle eye.
Or (3b) Thread the left needle for 5.7mm width (blue path)(page 12)
O
Thread left needle thread in the order 0 to (9) as shown. (Blue thread path) For easy threading
of needle (9), set movable knife in non-operating position. (See page 21 for setting movable knife
to non-operating position)
While holding thread with
finger wrap thread around
tension disk clockwise till
caught in hook and pull
thread down to mark cert
ain it is properly locat
ed in between the tension
discs.
• Lower needle bar when
threading (|) and (6).
• Use tweezers to thread
needle eye (
9
).
• Draw about 5cm (2
inches) of thread from
needle eye.