Preparation for sewing, Caution – SINGER 14U52 User Manual
Page 8
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
4. Preparation for sewing
Connect the machine plug to the electrical receptacle of your machine and the power line plug to the wall
receptacle.
To run the machine and control the speed, press the speed controller. The harder you press, the faster the
machine will sew. To stop the machine from sewing, remove your foot from the speed controller.
Caution:
• Be sure that the electrical voltage of the socket outlet (wall receptacle) is the same as the rated voltage
of the motor.
• Handle the foot controller with care and avoid dropping it on the floor. Be sure not to place anything
on top of it when not in use.
• Disconnect the power-line plug from the socket outlet when changing needles, presser feet or throat
plates, or when leaving the machine unattended. This eliminates the possibility of starting the machine
by accidentally pressing the speed controller.
• Before cleaning your machine, disconnect the power-line plug from the socket outlet.