SINGER 14U52 User Manual

Page 15

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

(4) Correct thread tensions for 2-thread wrapped edge overlook.

Be sure the threads are correctly threaded otherwise

proper tension cannot be obtained.

Set each tension dial to settings shown below and test sew on a sample of your fabric.

When using right needle for sewing normal width overedge seams, be sure to remove left needle.

Fabric

Tension Dial

Blue

Green Orange Yellow

Light weight

2.0 Spreader 1.0

Medium weight

2.5 Spreader 1.0

Heavy weight

3.5 Spreader 1.5

When using left needle for sewing wide

overedge seams, be sure to remove right

needle.

Fabric

Tension Dial

Blue Green Orange Y ellow

Light weight

2.5

Spreader 0.5

Medium weight

3.0

Spreader 0.5

Heavy weight

4.0

Spreader 0.5

Adjust thread tensions to suit your fabric making reference to table below. Make adjustments in

increments of no greater than half a number at a time.

^

When looper thread is too tight or needle

When looper thread is too loose

thread is too loose

mum

Meedle thread \

Needle thread \

Left looper

\

thread

Left looper

thread

Topside Underside

Topside Underside

Turn looper thread tension dial (yellow)
toward the (—) mark.

Turn looper thread tension dial (yellow)

Or, turn needle thread tension dial (blue

toward the (+) mark.

or green) toward the (+) mark.

J

13

Advertising
This manual is related to the following products: